Completed Case Studies
Work has been completed for the following case study. We welcome your contributions.
| No | Case Study Project | Contributor Name | University/ Institute | Year of Completion |
|---|---|---|---|---|
| 87 | Study of coanda effect for different fluids (Solver used: bubbleInterTrackFoam) | Akshay Thakur | bnvnbv | 2024 |
| 86 | Check certificate for 2022 (Solver used: laplacianFoam) | Divyesh | IIT Bombay | 2022 |
| 85 | Dump Title (Solver used: rhoSimpleFoam) | Ashley | IITB | 2021 |
| 84 | Study of coanda effect in turbulent jets (Solver used: interFoam) | Binayak Lohani | Tribhuvan University | 2021 |
| 83 | Coanda Effect: variation with curvature radius for laminar fluid jets (Solver used: interFoam) | Nikhil Sharma | Malaviya National Institute of Technology Jaipur | 2020 |
| 82 | TURBULENT FLOW OVER BACKWARD FACING STEP (Solver used: simpleFoam) | Kamal S Kumar | Swami Vivekanand University | 2020 |
| 81 | Study Of Flow Pattern and Vortices in a backward-stepped flow with two inlets (Solver used: pimpleFoam) | Shouvik Ghorui | Jadavpur University | 2020 |
| 80 | Study of Flow Pattern and Lift and Drag on a cylinder with two inlets at diametrically opposite points with parabolic velocity profile at inlet (Solver used: pimpleFoam) | Shouvik Ghorui | Jadavpur University | 2020 |
| 79 | NUMERICAL SIMULATION OF FLOW AROUND AND OVER SIX IN-LINE SQUARE CYLINDERS (Solver used: pimpleFoam) | Monalisha | Birla Institute of Technology, Mesra | 2020 |
| 78 | Reduction of Pressure Fluctuation on Hydrofoil NACA 0015 Using Cavitation- Bubble Generator (Solver used: interPhaseChangeFoam) | Monalisha . | Birla Institute of Technology, Mesra | 2020 |
| 77 | Simulation of 3-D Disinfectant Spray to Study Optimal Spray Cone Angle and Discharge Rate (Solver used: sprayFoam) | Monalisha . | Birla Institute of Technology, Mesra | 2020 |
| 76 | CFD study of deLaval nozzle with Fanno and Rayleigh condition (Solver used: rhoCentralFoam) | Shouvik Ghorui | Jadavpur University | 2020 |
| 75 | Study of boundary layer separation over NACA 662-015 symmetric and cambered airfoil through numerical method (Solver used: SimpleFoam) | Mukund S | Visvesvaraya Technological University | 2020 |
| 74 | Plasma Skimming through branched microchannel using OpenFOAM (Solver used: nonNewtonianIcoFoam & twoPhaseEulerFoam) | Sahil Deepak Kukian | Manipal Institute Of Technology | 2020 |
| 73 | CFD Simulation of Tesla Valve (Solver used: simpleFoam) | Vignesh.s.p | Anna University | 2020 |
| 72 | VISUALIZING TRANSIENT FLOW OVER A RIGHT CIRCULAR CYLINDER (Solver used: pisoFoam) | Kamal S Kumar | Swami Vivekanand University | 2020 |
| 71 | A CFD study on 2D SCRAM jet Intake using OpenFOAM (Solver used: rhoCentralFoam) | Sahil Deepak Kukian | Manipal Institute Of Technology | 2020 |
| 70 | CFD study of ventilation in a room maintained under negative-pressure to prevent airborne contamination (Solver used: buoyantPimpleFoam) | Shouvik Ghorui | JADAVPUR UNIVERSITY | 2020 |
| 69 | Numerical simulation of laminar and turbulent flow through a circular pipe (Solver used: icoFoam) | Monalisha | Birla Institute Of Technology, Mesra | 2020 |
| 68 | Performance Analysis of a Novel Surveillance UAV using OpenFOAM (Solver used: simpleFoam) | Sahil Deepak Kukian | Manipal Institute Of Technology | 2020 |
| 67 | Prediction of pressure, velocity distributions and visualization of flow patterns around NACA -2415 Airfoil for various angles of attack (Solver used: simpleFoam) | Vipinkumar C P | Lal Bahadur Shastri College Of Engineering | 2020 |
| 66 | Isothermal incompressible fluid flow through a T-Junction (Solver used: icoFoam) | Vipinkumar C P | Lal Bahadur Shastri College Of Engineering | 2020 |
| 65 | Natural Convection in an Enclosure Heated From Bottom (Solver used: buoyantPimpleFoam) | Shubhanshu Rai | Indian Institute of Technology, Jodhpur | 2020 |
| 64 | Supersonic Flow over Multiple Wedges (Shock-on-shock Interaction) (Solver used: rhoCentralFoam) | Sahil Deepak Kukian | Manipal Institute Of Technology | 2020 |
| 63 | Numerical simulation of water bottle filling in openFOAM (Solver used: InterFOAM) | Nandha Kumar. R | Anna University | 2020 |
| 62 | Supersonic flow over a Double-Wedge Airfoil (Solver used: sonicFoam) | Mridu Sai Charan A S | PES University | 2020 |
| 61 | Flow Prediction around a NACA0012 Airfoil at low Reynolds Number (Solver used: pisofoam) | Subham Kant Das | IIT Jodhpur | 2020 |
| 60 | Gravity Driven Flow (Solver used: interFoam) | Subham Kumar Das | National Institute of Technology Durgapur | 2020 |
| 59 | DSMC simulations of Mach 10 hypersonic rarefied flow over a 2D cylinder (Solver used: dsmcFoam) | Mrinal Mahato | IIT Bombay | 2020 |
| 58 | Numerical Simulation of Vortex Shedding Suppression From a Circular Cylinder Using Rigid Splitter Plates (Solver used: pisoFoam_Vino (modified pisoFoam)) | Vinoth Kumar D | IIT Bombay | 2020 |
| 57 | CFD analysis of fluid flow and heat transfer in a shell and tube heat exchanger in OpenFOAM (Solver used: chtMultiRegionFoam) | Raj Kumar Saini | IIT Bombay | 2020 |
| 56 | Numerical Simulation Melting of Ice using OpenFOAM (Solver used: chtMultiRegionFoam) | Vignesh.s.p | Anna University | 2020 |
| 55 | Atmosphere in a differentially heated rotating annulus: Baroclinic waves (Solver used: buoyantBousinessqPimpleFoam) | Shivam Swarnakar | IIT Bombay | 2020 |
| 54 | Validation of laminar pipe flow (Solver used: simpleFoam) | Raj Kumar Saini | IIT Bombay | 2019 |
| 53 | CFD simulation of flow through pipe to validate Entrance length and fully developed Flow in laminar & turbulent flow (Solver used: icoFoam & pisoFoam) | Manoj Paithane | Maharashtra Institute Of Technology, Pune | 2019 |
| 52 | Magneto-Hemodynamic Flow in a Two-Sided Lid-Driven Cavity (Solver used: nonNewtonianMhdFoam) | Padmini Priyadarshini | IIT Bombay | 2019 |
| 51 | Simulation of Fighter Aircraft in sonicFoam (Solver used: sonicFoam) | Bhaskar S | Anna University Chennai | 2019 |
| 50 | 2D turbulent buoyant flow (Solver used: buoyantSimpleFoam) | A. Sibo Anthony | NIT Manipur | 2019 |
| 49 | Effect of transverse magnetic field on the conducting fluid flow through pipe with constriction (Solver used: mhdFoam) | Padmini Priyadarshini | IIT Bombay | 2019 |
| 48 | Air-flow in bed-room with rotating fan explaining cyclic AMI in OpenFoam (Solver used: pimpleFoam) | Variya Divyesh Dilipbhai | Gujarat Technological University | 2019 |
| 47 | Mach Reflection: Flow over a Forward facing Step (Solver used: rhoCentralFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 46 | Validation of Stoke's Law (Solver used: simpleFoam) | Raj Niraj Patil | NIT Agartala | 2019 |
| 45 | Magnus Effect: Rotating Cylinder in a Turbulent Flow (Solver used: pimpleFOAM) | Ashley Melvin | IIT Bombay | 2019 |
| 44 | Laminar Flow across an Oscillating Cylinder (Solver used: pimpleDyMFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 43 | Pressure Driven Flow through a Nozzle connected to a Reservoir (Solver used: rhoCentralFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 42 | Detached Bow Shock Formation in a Supersonic Flow over a Wedge (Solver used: rhoCentralFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 41 | Flow through a Convergent-Divergent Nozzle (Solver used: rhoCentralFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 40 | Visualization of the bubble and its growth, along with mixing phenomenon in multi-jet fluidized bed. (Solver used: twoPhaseEulerFOAM) | Shivam Swarnakar | NIT Nagpur | 2019 |
| 39 | Rayleigh-Benard Convection (Solver used: buoyantBoussinesqPimpleFoam) | Ashley Melvin | IIT Bombay | 2019 |
| 38 | Rayleigh-Taylor Instability (Solver used: interFoam) | Raj Niraj Patil | NIT Agartala | 2019 |
| 37 | Hydraulic Jump (Solver used: interFoam) | Raj Niraj Patil | NIT Agartala | 2019 |
| 36 | Analysis of body(sphere) falling in liquid(water) (Solver used: overInterDyMFoam) | Raj Niraj Patil | NIT Agartala | 2019 |
| 35 | Analysis of flow behavior when obstructed by moving vane (Solver used: pimpleFoam) | Vignesh.s.p | Sri Ramakrishna Engineering College, Anna University | 2019 |
| 34 | Cooling of sphere - natural and forced convection (Solver used: chtMultiRegionFoam) | Vignesh.s.p | Sri Ramakrishna Engineering College, Anna University | 2019 |
| 33 | Simulation of water droplet impact on hydrophilic and hydrophobic surfaces (Solver used: interFoam) | Vignesh.s.p | Sri Ramakrishna Engineering College, Anna University | 2019 |
| 32 | Model vertical axis wind turbine with dynamic mesh (Solver used: pimpleFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 31 | Film cooling on a flat plate by air-water mist injection (Solver used: reactingMultiphaseEulerFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 30 | Dust particles tracking inside a model room (Solver used: DPMFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 29 | Numerical study of flow of electrically conducting fluid over an airfoil (Solver used: mhdFoam) | Rahul Radhakrishnan | Vellore Institute of Technology | 2019 |
| 28 | Different discretization schemes in OpenFOAM (Solver used: scalartransportFoam) | Variya Divyesh Dilipbhai | Government Engineering College, Valsad, Gujarat Technological University | 2019 |
| 27 | Falling of water droplet on the pool of water (Solver used: InterFoam) | Variya Divyesh Dilipbhai | Government Engineering College, Valsad, Gujarat Technological University | 2019 |
| 26 | Simulation of incompressible magneto-hydrodynamic flows (MHD) using mhdFoam solver (Solver used: mhdFoam) | Anant Talasikar | D. J. Sanghvi College of Engineering, Mumbai University | 2019 |
| 25 | Numerical investigation of fluid flow around NACA0012 airfoil using OpenFOAM (Solver used: pisoFoam) | Subham Kant Das | IIT Jodhpur | 2019 |
| 24 | Analysis of free-falling wedge onto water using OpenFOAM (Solver used: overInterDyMFoam) | Vignesh.S.P | Anna University | 2019 |
| 23 | Lift and drag force analysis on cambered airfoil for different chord length (Solver used: simpleFoam) | Ganesh Kumar K | National Engineering College, Kovilpatti | 2019 |
| 22 | Experimental and numerical investigation on the effects of jet Reynolds number and nozzle-plate spacings on single round air jet (Solver used: buoyantBoussinesqSimpleFoam) | Gikku Tom | Mar Athanasius College Of Engineering, APJ Abdul Kalam Technological University | 2019 |
| 21 | Natural convection study of air between heated walls (Solver used: buoyantSimpleFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 20 | Hydrodynamics study of a bubbling fluidized bed (Solver used: twoPhaseEulerFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 19 | Effect of slotted hole on film cooling using OpenFOAM (Solver used: buoyantSimpleFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 18 | Air flow analysis in an empty room using OpenFOAM (Solver used: pisoFoam) | Jishnu Handique | NIT Manipur | 2019 |
| 17 | Wind analysis around tall buildings (Solver used: simpleFoam) | Ratish Dixit | Vellore Institute Of Technology, Chennai | 2019 |
| 16 | Simulation of transition between regular and mach reflection of a poly-tropic gas in a dual-solution domain (Solver used: rhoCentralFoam) | Rohan | Bms College Of Engineering | 2019 |
| 15 | Implementing streamwise periodic boundary condition in OpenFOAM (Solver used: simpleFoam) | Harikrishnan S | IIT Madras | 2019 |
| 14 | Water flow simulation in an elbow draft tube (Solver used: icoFoam) | Arpit Arvind Jain | Maulana Azad National Institute Of Technology | 2019 |
| 13 | CFD analysis of an airfoil NACA 4410 and estimating its coefficient of lift and drag (Solver used: simpleFoam) | Antim Gupta | Vellore Institute Of Technology - Chennai | 2019 |
| 12 | Annulus water jacket cooling of an induction motor (Solver used: buoyantSimpleFoam) | M Devesh | Vellore Institute Of Technology | 2019 |
| 11 | Simulation of shocktube problem using pisoCentralFoam (Solver used: pisoCentralFoam) | Sathish Kumar Kanniappan | IIT Bombay | 2019 |
| 10 | Simulation of supersonic flow over wedge using pisoCentralFoam (Solver used: pisoCentralFoam) | Sathish Kumar Kanniappan | Iit Bombay | 2019 |
| 9 | CFD simulation and experimental validation of flow through a mouthpiece (Solver used: interFoam) | Rajat Walia | Vellore Institute Of Technology | 2019 |
| 8 | Aerodynamic study of Formula-1 car (Solver used: simpleFoam) | Variya Divyesh Dilipbhai | Gujarat Technological University | 2018 |
| 7 | Multiphase flow simulation over INS Vikramaditya (Solver used: interFoam) | Variya Divyesh Dilipbhai | Government Engineering College, Valsad, Gujarat Technological University | 2018 |
| 6 | Simulating multiphase flow over cylinder and simple boat using OpenFOAM (Solver used: interFoam) | Siddhant Saraswat | NIT Surathkal | 2018 |
| 5 | Study of flow around a re-entry space capsule and a parachute using Openfoam (Solver used: sonicFoam) | Vishish Behera | SRM University | 2018 |
| 4 | Flow visualization on v-gutter and teethed v-gutter flame holders (Solver used: simpleFoam) | Bhaskar S | Tagore Engineering College, Anna University | 2018 |
| 3 | External incompressible flow over hull of ship (Solver used: simpleFoam) | Siddhant Saraswat | NIT Surathkal | 2018 |
| 2 | CFD analysis of a bullet train (Solver used: simpleFoam) | Variya Divyesh Dilipbhai | Government Engineering College, Valsad, Gujarat Technological University | 2018 |
| 1 | Air flow simulation around a bullet using OpenFOAM (Solver used: sonicFoam) | Akash Padmane | IIT Bombay | 2018 |